Case Sealing

• Little David LD-7

  The Little David LD-7 Uniform Case Taper is an economical top and bottom case sealing large runs of uniform boxes, or for those applications that require infrequent box size changes. The LD-7 applies a single strip of pressure sensitive tape to both the bottom and the top of the case simultaneously. As the box passes through the machine, rubber rollers wipe down the tape top and bottom. The securely sealed box is automatically discharged, and the LD-7 is then ready to process another box. Top and bottom tape cartridges are instantly removable and interchangeable. A counter balanced upper head allows box height adjustments to be made in only seconds. Leg extensions allow easy height adjustment from 565 mm to 760 mm for maximum operator comfort.

  Automation

  Self-centering and self-tensioning drive belts.

  Safety Precautions

  Specially designed knife guards for maximum safety.

  Other Characteristics

  • Instantly removable and interchangeable top and bottom CaseLocker© tape cartridges.
    
    
  • Counter-balanced upper head for quick and easy box height changes.
    
    
  • Bottom belt drive for maximum simplicity.
    
    
  • Self-centering and self-tensioning drive belts.
    
    
  • Tape tension can be easily adjusted.
    
    
  • Patented fingerplate design ensures positive tape feed.

  Warranty

  Full 12-months warranty. 

  Technical Data

  Machine Type	Model LD-7
  Closure Material	Pressure sensitive tape of good quality
  Tape Dimensions	Width: 38 mm to 51 mm
  Roll Size	Up to 380 mm diameter
  Box Capacity	Length: 76 mm to infinite Width: 114 mm to 508 mm Height: 114 mm to 508 mm
  Connected Current	220 V AC, 50 Hz
  Overall Dimensions (LxWxH)	95x75x138 cm
  Weight (approx.)	85 kg

  The above machine exceeds the safety specifications of the 98/37/EK directive of the EU.
  
  Technical Data above may change without prior notice.

   

• Little David LD-16

  The Little David LD-16 provides low cost, fully automatic top and bottom case sealing for applications involving large runs of boxes of the same size. Box size adjustments can be made in less than a minute. The LD-16 provides continuous, high-speed case sealing operation without operator assistance. Unsealed, filled boxes of the same size are automatically sequenced into the machine one at a time via an indexing gate The LD-16 closes all four top flaps and applies pressure sensitive tape to the top and bottom simultaneously. Rollers wipe down the pressure sensitive tape securely and the box is discharged from the machine, while the next box is automatically sequenced into the LD-16. If production drops bellow the high-speed maximum, the machine simply waits for the next box.

  Automation

  • Self centering side rails for easy adjustments for different box sizes.
    
    
  • Self-centering and self-tensioning drive belts

  Safety Precautions

  • Specially designed knife guards for maximum safety.
    
    
  • Maximum safety is ensured through the use of safety gates, which shut off the machine immediately when opened and evacuate the air from the pneumatic system.

  Other Characteristics

  • Permanently lubricated bearings and pneumatic system.
    
    
  • Heavy duty CaseLocker© tape cartridges for maximum reliability.
    
    
  • Instantly removable and interchangeable top and bottom CaseLocker© tape cartridges.
    
    
  • Counter-balanced upper head for quick and easy box height changes.
    
    
  • Bottom belt drive for maximum simplicity.
    
    
  • Tape tension can be easily adjusted.
    
    
  • Patented fingerplate design ensures positive tape feed.

  Warranty

  Full 12-months warranty. 

  Technical Data

  Machine Type	Model LD-16
  Closure Material	Pressure sensitive tape of good quality
  Tape Dimensions	38 mm to 51 mm LD-16A 38 mm to 76 mm LD-16B
  Roll Size	Up to 380 mm diameter
  Box Capacity	Length: 203 mm to 610 mm  Width: 127 mm to 508 mm Height: 114 mm to 508 mm
  Connected Current	220 V AC, 50 Hz
  Air Consumption	120 lt/min at 6 bar
  Overall Dimensions (LxWxH)	195x95x78 cm
  Weight (approx.)	175 kg

  The above machine exceeds the safety specifications of the 98/37/EK directive of the EU.
  
  Technical Data above may change without prior notice.